THE LADDER SYSTEM is manufactured in 3 depths:

Speedway 4 (SW3) – 100mm overall depth

Speedway 5 (SW5) – 125mm overall depth

Speedway 6 (SW6) – 150mm overall depth

SYSTEM ATTRIBUTES
Special Profiled Side Section:
1. Enhanced structural rigidity
2. Increased internal width for cables
3. High performance coupling
4. Safety edge

Slotted Slide Section:
1. Allows faster installation as the ladder can be cut to any length and coupled without on-site drilling
2. Fixing to ladder sides
3. Reduced weight
4. 6mm fixing holes for instrumentation tubing

Shallow Channel Rungs:
1. The welding of the rungs to the lowest point of the side section ensures maximum loading depth
2. High strength even in the widest ladders
3. Use of every known type of cleat, tie and bonding with infinite adjustment
4. Rungs alternately inverted (on lengths) permitting suspension of light fittings ect. from underside

Cable Ladder is supplied in various materials and finishes:

G Mild Steel to BS1449, hot dip galvanised after manufacture. To BS EN 1461: 1999.

XG Silicon Bearing Steel, hot dip galvanised after manufacture.

EP Mild Steel to bs1449, epoxy coated.

SS Stainless Steel type 316-316L to BS EN 10088-2 (formerly BS1449 Pt.2)

Note: Length =3M